I. Product Overview ZCQ type self-priming magnetic drive pump, the pump in order to replace the static seal dynamic seal, the pump flow components in a completely sealed, completely solved the other pump mechanical seal can not avoid the run, run, drip, leak the drawbacks, ZCQ type self-priming magnetic pump and material flow components are used corrosion-resistant stainless steel, corundum ceramics, PTFE graphite and other materials, both CQ type magnetic drive pump function, but also set a self-priming in one, the use of external mixing type axial back to the pump structure, pump liquid from the suction chamber, liquid storage room, volute, back hole, gas-liquid separation chamber and other part of the composition, the centrifugal force, the suction chamber The remaining liquid and the air inlet pipe is gas-water mixture into a mixing impeller, the mixture was spiral into the gas-liquid separation chamber, with the slow down, resulting in gas-water separation, air from the pump fluid discharge port, liquid through the return return water hole pump, after several cycles, the air inlet pipe is drained, so the formation of certain vacuum pump, to the role of self-absorption, magnets using temperature materials, with a cooling device can deliver higher temperature of the liquid. Second, the product uses the series magnetic pump is widely used in the case of self-absorption need for petroleum, chemical, pharmaceutical, electroplating, printing and dyeing, food, research, and other units pumping acids, alkalis, oils and rare and precious fluid, venom, volatile liquid and circulating water equipment, particularly susceptible to leakage, flammable, explosive liquid pumping.